ELEGANT CREATIONS P LTD.
Featured Products
Highest quality standards are achieved through the implementations of latest technology, decades of experience and everlasting moral values , which have helped us to retain our customers as well as multiply them.
Welcome to ELEGANT CREATIONS P LTD.
Drop Weight Tear Testing Machine
Application
DROP WEIGHT TEAR TESTING MACHINE is mainly used for test of Ferrite Steels to observe Specimen Fracture Surface after impact within the Temperature that Fracture type is converted from Non-ductility to ductility.
Elegant Creations Pvt. Ltd. offer a Range of DROP WEIGHT TEAR TESTING MACHINE for measuring the Fracture Characteristics of Steal Specimens according to APT recommended Practice 5L3, EN 10274 & ASTM-E436. DROP WEIGHT TEAR TESTING MACHINE can be accommodating Steel grades of X120 and Specimens of up to 50mm thick.
Main Features
1. Very Robust Design & Construction Stand up to the stratum of high energy testing.
2. Variable Impact energy by adjusting the mass & Lifting Height of weight.
3. Easily Interchangeable Contact parts simplify Maintenance and Reduce the down time
4. Automated Specimen Loading provides Compliance with cycle times required by test Method.
5. The Buffer is provided to absorb the residual energy after breaking the Specimen to protect the weight and anvil from damaging.
6. All safety features provide such as safety net, safe pin for maintenance and hanger locking. Also provide Specimen Carrying outfit, anti falling of outfit for the Specimen, Cantering device to quick, accurate and reliable test.
7. Very rigid base and anvils ensures Very low flexure under high test Loads.
8. Guided system provided to ensure that the impact of specimen & anvil is Correct throughout the entire test.
9. High quality and easy to use Control Software provided for Consistency.
10. Optional liquid type low temperature chamber.
11. Optional Automatic Specimen feeding system.
12. Optional Automatic Hydraulic press for Notch
Locking Ring
Application
Equipment for Solvent Extraction Plant and Self-Locking Retaining Rings are ideal for applications that have high rotational requirements. This feature allows the ring to function properly at speeds that exceed the recommended rotational capacity. The self-locking option can be incorporated for both external and internal rings.
The self-locking feature utilizes a small tab on the inside turn locking into a slot on the outside turn. Self-locking allows the ring to operate at high speeds, withstand vibration, function under rapid acceleration and absorb a degree of impact loading.
Bearing Block
Application
A bearing block is used to provide support for a bearing supporting a rotating shaft. The housing material is typically made of steel or aluminum. Bearing blocks primarily mount bearings safely, enabling their outer race to be stationary while allowing rotation of the inner race.
The housing is mounted to a foundation using bolts through the holes in the bearing mount. Bearing blocks used in screw & nut assemblies may not be rated for the same static load as the screws or nuts with which they are used. Contact Joyce/Dayton to verify that bearing blocks are adequately sized for the required loads
Our Vision
* To embrace new technologies and methods. * To give unsurpassed products and services to the clients. * To constantly look for improvement and changes.
